Resolve the problem after resetting the Canon Pixma iP1700

10:38 AM Posted by

Resolve the problem after resetting the Canon Pixma IP 1700, I find two problem often happened when resetting the printer. First case, My Canon Pixma IP 1700 becoming Canon Pixma IP1300 after resetting the eeprom, second case, cartridge not recognize after resetting the counter then the led blinking 5X orange and 1X green..

1. My Canon pixma IP 1700 becoming IP1300
My Canon Pixma IP1700 becoming canon Pixma IP1300, this problem happened after resetting the eeprom of Canon IP1700 using IPtool. The solutions for this problem :
  • Install driver for canon IP1300, you can download the driver in the canon website.
  • Now run IPtool software, auto recognize as Canon Pixma IP1300
  • In the change model set the printer to IP1700.
  • In the EEPROM Operations click reset button. Turn off the printer and turn on again, the problem solved now your Canon printer becoming Canon Pixma IP 1700 again.
2. Blinking orange 5x and green 1x and the color/black cartridge not recognized
This problem appear after several times reset ink level the cartridge. If this reset methode does not work to solve the problem. I get this solution after several times try resetting using various combinations button. Solutions for the problem are:
  • Start with printer off
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and press Resume 2 times, then press and hold the resume button, release power button.
  • Green lights will flash and then stop blinking (Keep hold the resume button).
  • When green lights are solid, release resume button and press again the Resume button 4 times.
  • Don’t switch of the printer (because if your trun off and turn on again the printer the problem still appear), Now reset the counter and EEPROM canon IP1700 using IPTool software (recommended).
  • Turn off and turn on again the printer, the printer should respond as normal. In my Canon IP1700 problem solved.


Read More Add your Comment 0 comments


Repair or Reset Counter Canon Pixma MP190

8:29 PM Posted by

Repair or Reset Counter Canon Pixma MP190. This article is to answer many questions about reset method Printer Canon Pixma MP190 from this blgo readers. And I found this method but I’m not tried  this reset method, I just share this manual reset in this blog. You can try this reset method to reset waste ink counter in your Canon Pixma MP190.

Canon Pixma MP190 all-in-one is compact ans styles photo printer with printing, copying and scanning features. This printer using advance copy technology for best copying result. Price of the Canon MP190 in the market is about $40.

Waste Ink Counter Reset for Canon MP190:
  1. Turn on the printer then press Menu-Copy-Scan-Copy-Copy to enter enter into SERVICE MODE.
  2. After enter into service mode, Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT] to reset the ink counter in the printer.
  6. Press the [Set] key.
  7. Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key
After reset manually you can use software resetter to reset the printer. The software can download from this link: Download software resetter Canon Pixma MP190


Read More Add your Comment 4 comments


How to disable Low Ink Warning in The Hp Deskjet 2466

11:39 AM Posted by

A few days ago my printer Deskjet 2466 always show low ink warning and this message very disturbing my work. After searching the service for my HP printer that running  in my computer, I found 2 service running for this HP printer. I try to disable the service and it success remove warning message in my computer.

Besides tried in my computer this method on my computer that using HP deskjet 2466, I also tried on other computer that installed that using HP deskjet 2180 all in one printer and it working 100%. The both printer using cartridges HP21 and HP22. I thinks this methods also can be used to remove low ink message on other printer that using the same HP cartridge types.

Here the Methods to Disable Low Ink Warning in the HP Deskjet 2566:
  1. Open system configuration utility by click start-run then type msconfig
  2. Go to Startup Tab then disable HPWuSchd2 and HP Digital Imaging
  3. Click apply then Ok
  4. You must restart the computer to take effect
The above methods only for disable low ink warning, not reset the ink level. To reset ink level on the HP printer models mentioned above you use this methods: Ink Levels Reset for HP Cartridges HP21, HP27, HP56, HP58 and How to Reset Ink Levels for HP Cartridges HP22, HP28, HP57. Good luck.


Read More Add your Comment 1 comments


Repair or reset for HP Cartridges HP22, HP28, HP57

7:58 PM Posted by

Ink level Reset method for HP Cartridges HP22, HP28 and HP57 almost similar with Ink Levels Reset for HP Cartridges HP21, HP27, HP56 and HP58. HP22, HP28 and HP57 is color cartridges HP printers. This manual reset methode to solve low ink warning on this hp cartridges. This ink levels reset method has tested and also work on my HP printer HP D2466.  If this ink levels reset methode does not work on your HP printer, you can try more than 1 times in your hp printer.

Here Ink levels reset methode for HP Cartridges HP22, HP28 and HP57 (On most models):
  1. Remove cartridge from your printer.
  2. Place a piece of tape over the top left contact as shown in red on the picture to the right.
  3. With the tape covering the contact place cartridge back into printer.
  4. The printer will perform and alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step)
  5. Once an alignment page has been printed remove cartridge from printer.
  6. Place a piece of tape over the second contact shown in red.
  7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one cover the second contact.)
  8. Printer will print another alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  9. Once the second alignment page has been printed remove cartridge from printer.
  10. Remove tape pieces from cartridge contacts
  11. Make sure there is no residual adhesive on cartridge contacts.
  12. Place cartridge into printer. Cartridge should now read full.
Notes: It is very important that there is no residual adhesive on the cartridge contact point. This will make reading the cartridge difficult.


Read More Add your Comment 28 comments


Repair or reset for HP Cartridges HP21, HP27, HP56, HP58

7:45 PM Posted by

This reset methods be used to reset ink levels on HP printer that using cartridges HP21, HP27, HP56 and HP58 (On most models). I have tested this reset methods on HP Deskjet 2466 and work perfectly but in other HP printer types  this reset methods does not work.

To do this reset methods no software resetter required, just require  only a piece of tape. If this reset method does not work on your printer you will need to repeat this process. If you have to reattempt the reset turn your computer off before doing so. Leave computer off during the reset process or disconnected the printer from computer.

Here the Ink levels reset methode for HP cartridges HP21, hp27, hp56 and HP58:
  1. Remove cartridge from your printer.
  2. Place a piece of tape over the top left contact as shown in red on the picture to the right.
  3. With the tape covering the contact place cartridge back into printer.
  4. The printer will perform and alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  5. Once an alignment page has been printed remove cartridge from printer.
  6. Place a piece of tape over the second contact shown in red.
  7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one cover the second contact.)
  8. Printer will print another alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  9. Once the second alignment page has been printed remove cartridge from printer.
  10. Remove tape pieces from cartridge contacts Make sure there is no residual adhesive on cartridge contacts.
  11. Place cartridge into printer. Cartridge should now read full.

Additional Notes: As stated above it is very important that there is no residual adhesive on the cartridge contact point. This will make reading the cartridge difficult.


Read More Add your Comment 1 comments


Repair or reset Canon PIXMA MP240 printer

8:46 AM Posted by

How do you repair or reset Canon PIXMA MP240 printer after refilling ink cartridges? I refilled the Canon PIXMA MP240 cartridges using a refill kit. Printer won't recognize them anymore. Hours of Googling and pressing random buttons resulted in nothing useful. Any idea if it's even possible to "convince" a Canon PIXMA MP240 printer to take refilled cartridges? If so, how?

Repair or reset Canon PIXMA MP240 printer:
  1. Disconnect the power cable to the printer.
  2. Hold down the On/Off button.
  3. Reconnect thew power cable.
  4. With the power button still down, press the Stop/Reset button twice.
  5. Release the On/Off button.
  6. The printer is now in the factory mode (wait until idle is displayed)
  7. Press the right arrow button (next to the OK button) repeatedly until Shipping Mode 3 is displayed.
  8. Press the OK button.
  9. Wait until "Without Cleaning" is displayed and then press the Stop/Reset button once.
  10. A test page should print, but if not, don't worry.
  11. Open the cover. The cartridge should position themselves at the far left-(the cartridge removal location.)
  12. Disconnect the power cable.
  13. Remove both cartridges.
  14. Close the cover.
  15. Reconnect the power cable.
  16. Press the On/Off button.
  17. Wait until a Replace Cartridges message is displayed. Now insert the cartridges.
  18. Close cover and wait until the printer is in the normal mode and displays the normal start menu (i.e. Copy)


Read More Add your Comment 1 comments


 

Our Partners

© 2010 Printer Repair Experts All Rights Reserved Thesis WordPress Theme Converted into Blogger Template by Hack Tutors.info